Medical Device Products

 Laser facet ablations, with our portable diode laser system, is a minimally invasive surgical procedure that offers several advantages including short recovery times and minimal occurrence of scar tissue. Lasers are used to clean facet joints and remove nerves that are the source of pain. Requiring no general anesthesia, facet laser ablation is a safe alternative to open back surgery.

 Radiofrequency ablation (or RFA) is a procedure used to reduce pain. An electrical current produced by a radio wave is used to heat up a small area of nerve tissue, thereby decreasing pain signals from that specific area. 

Life Spine’s comprehensive inventory of procedural solutions are suited for a variety of applications. They engineer or create procedural solutions for the following applications: 

• Biologics 
• Cervical 
• Expandable 
• Lateral 
• Interbody 
• MIS 
• OSSEO-LOC
• SI Fixation 
• Thoracolumbar 

 With its unique combination of irrigation, deflection and the ability to use laser and conventional instruments, LASE® allows the surgeon to perform simple nerve root decompression or a complete discectomy.

LASE uses the Ho:YAG laser, surgical instruments and irrigation to facilitate nerve root decompression or discectomy.

​

 The Mobi-C Cervical Disc has been designed for cervical disc replacement to restore segmental motion and disc height. 

The components of Mobi-C include superior and inferior cobalt chromium molybdenum alloy endplates coated with plasma sprayed titanium and hydroxyapatite coating, and a polyethylene mobile bearing insert. 

The controlled mobility of the patented mobile core is the foundation of Mobi-C, encouraging height restoration and respect of the instantaneous axis of rotation for a return to physiological mobility of the spinal segment.

 This technique involves a minimally invasive procedure with fluoroscopic guidance. The affected facet surfaces are prepped for placement of an allograft dowel with instrumentation for expansion and stabilization of the facet joint space. The allograft is made from bone obtained from both the femur and tibia. 

 The Industry's first Stand-Alone Wedge Fixation System provides pre-sized implants, manufactured from PEEK (Polyetheretherketone) and Titanium, for use in various procedures in the foot. 

​

TARSA-LINK’s innovative design offers a simplified approach for use in an Evans Procedure for Lateral Column Lengthening and in a Cotton Procedure for Plantar Flexion Opening Wedge Osteotomies of the Medial Cuneiform.

​

• Stand-Alone wedge design offers integrated screws to retain the implant in place and ensure a stable environment for fusion
• Designed to reduce site irritation due to being flush in the osteotomy site without the need for additional supplemental fixation
• PEEK Material is radiolucent allowing fusion assesment
• Large, open graft windows for maximum visibility and bone graft containment
• Offered in PEEK and titanium, implants are available in a variety of sizes and footprints accommodating varying anatomical conditions

 The TARSA-LINK Bunion Correction System, manufactured from titanium, is a stand-alone opening base wedge with built-in fixation. BUNION’s innovative design offers a simplified approach for bunionectomies, opening base wedge osteotomies, bone fractures, fusions or trauma.

​

• Stand-Alone wedge design offers integrated screw to retain the implant in place and ensure a stable environment for fusion
• Reduces procedure time and offers stabilization equivalent to traditional constructs
• Unique C-shape allows for easy insertion and removal
• May reduce site irritation due to being flush in the osteotomy site without the need for additional supplemental fixation

 The ROGUE Hammertoe Correction System offers a dual threaded design and is inserted between the proximal and middle phalanges, so that the opposing threads fixate on the phalangeal canal of the toe and compress the joint.

​

• Fully implanted device designed to lower infection rate and reduce pain by eliminating the use of wires that protrude post-op
• Dual threaded distal and proximal components for bone purchase and compression across the joint
• Follow up surgery typically required to remove wires is not necessary
• Streamlined instrumentation designed to reduce OR time

 The Saturn External Fixation System is composed of rings, struts, threaded rods, pins, wires and connectors. It is intended to be used as a means to stabilize bone segments for indications within the foot and ankle.

• Dual row ring design providing the surgeon more exibility for strut, half pin and wire placement
• Fine-tune adjustment knob to allow greater opportunity for clinical success
• Simplistic approach maximizes utility and may help clinicians in their goal of limb preservation and function

Osteo-Link has been engineered and processed to deliver the highest of osteoinductivity, a cording to in-vivo test results. Differentiated putty, strips, cubes and filler are available to help influence better patient outcomes and reduce costs. 

• Osteo-Link Putty is 100% DBM by weight
• Many available DBM putties contain up to 83% extrinsic carriers, none of which have been clinically proven to be osteoinductive and help induce new bone growth
• No money wasted. Every dollar spent goes towards an all DBM product

Bone Marrow Harvesting Systems overcome the limitations of a traditional bone marrow needle and results in a bone marrow harvest that is so rich in key stem and progenitor cells that the aspirate may no longer require manipulation through centrifuge prior to application.

• BMA with high concentration of cells without the need of a centrifuge
• No bulky machine and no extra processing time

 Harvest PRP delivers a concentration of autologous platelets and growth factors that is roughly 4-6 times greater than that found in whole blood. Unlike other products, it delivers a broad range of growth factors in the proper concentration and ratios to help optimize conditions for healing.1,5,6 Clinical studies have shown that application of PRP can help reduce bleeding, minimize pain, reduce infection rates, and optimize overall healing.7-14

​

Harvest PRP procedure packs are all-inclusive based on clinical need. They are designed for use with the multifunction SmartPrep® technology platform.

Manufactured by Harvest Technologies, U.S.A.

 Connective tissue contains functional ECM components that support constructive remodeling.

​

CTM develops and creates immune-privileged Connective Tissue and ExtraCellular Matrix (ECM) structural implants. Our products are designed to cover or protect tissues intra-operatively and to augment or replace damaged or inadequate tissue at the surgical site.

Boost, Paste, Flow, Thin, Thick, X-Thick

 Debridement plays an important role in the treatment of complex wounds. As part of wound management, it prepares the wound bed in order to promote a rapid and complete healing.

​

Ultrasonic-Assisted Wound Debridement (UAW) is a very effective and gentle method for the cleansing of chronic and acute wounds with a worldwide unique level of evidence. Even hard-to-reach areas can be debridated without an extensive surgical scenario. Wound treatment can be carried out on an outpatient basis and with local anesthesia by doctors or specialized nursing staff.